Biomat - How It Works
Bio-Mat: How it works
The Biomat relies on three healing concepts: The Amethyst, Negative Ions and Far Infrared Rays. Together, they make this medical device not only unique, but effective and approved by the FDA.



Initially, it was believed that the health benefits of the BioMat came from the heat of the infrared technology.
After three years of research, it was discovered that the main benefit was not from heat, but rather from the “vibration energy” that the infrared provides.


Research was conducted into studying the energy spectrum of the healthiest and most natural frequencies for infrared and negative ions.
From that research, they were able to improve the BioMat technologies to include two types of infrared waves. One type is referred to as a “photon” infrared wave, at 6.5 microns.


In addition, they identified a “phermo” infrared wave, which ranges
from 9 to 12 microns.
The abundant negative ions
in our natural atmosphere, such
as a vibrant virgin forest, was studied so that their results could mimic the natural sources of healing for the human body.


In addition, they identified a “phermo” infrared wave, which ranges
from 9 to 12 microns.
The abundant negative ions
in our natural atmosphere, such
as a vibrant virgin forest, was studied so that their results could mimic the natural sources of healing for the human body.


An additional change resulting from this research was that the core ingredient was changed from Jade to Amethyst crystal.
All things generate some form of infrared ray and energetic frequency. Upon observing the energetic spectrum of Amethyst, scientist saw how similar the frequency was to our human body.


Richway International, Inc. is proud that the Biomat is our leading product. Biomat's emit Far Infrared Rays and Negative Ions.
The Richway Biomat is a U.S.F.D.A Class II Medical Device
Unlike an electric blanket, the Biomat does not get hot. However, if you lie down on it, it warms the inside of your body and the part of the pad touching your skin gets warm.


When any part of the pad gets higher than the selected temperature, the sheet current is cut off by thermal sensors distributed throughout
the Biomat.
The Biomat comes with an external control box where the AC power is converted to DC.


The external control box allows you to adjust the desired temperature and running time
(between 2, 4, 8, or 12 hours).
As an added safety feature, when the controller is set to 122F or higher, it will automatically step down to 113F after 4 hours.


To increase this negative ion flow, it was decided to add alternating rows of Tourmaline so that the FIR could still be amplified through
the amethyst and
an additional dose of negative ions would be naturally discharged from the Tourmaline.
This solution delivers the anticipated number of negative ions to the person.


Made with 17 key layers
- Surface material: Silicon urethane with cotton
- Amethyst (with Tourmaline): Transfers natural far infrared rays
- Top waterproof layer
- Hyron cotton layer for thermal insulation
- Carbon layer for amplifying far infrared rays


- Urethane protection/reflection
- Solid square cotton padding layer
- Second fiber glass layer (Prevents over heating and harmful EMF waves)
- EMF protected heating layer with Thermostats and Bi-metals
- Second Urethane layer for protection and reflection
- Concentrated ceramic layer for reflection of far infrared rays
- Hyron silk cotton padding layer for thermal insulation
- Bottom material: High quality cotton with brass pattern
This Biomat sounds like a such a simple AND effective therapy!
We will get back to you as soon as possible.
Please try again later.
Free Webinar
Hours
M-F: 9am - 5pm
Sat/Sun: Closed
Telephone
livingwaterscleanse@gmail.com
Join our 10-Day Deep Tissue Cleanse & Healing Retreat and change your life for the better.